Cyber Savings: 10% (no code) & Free shipping on orders over $150.
Les Paul Solderless Wiring Harnesses
Upgrade your Les Paul with pro-level flexibility — no soldering required. Built with high-quality CTS pots, Switchcraft switch & jack, Orange Drop capacitors, and push-in terminal blocks, this harness delivers clean signal flow, durability, and easy installs.
🔹 Features include:
- Volume Clarity Select (treble bleed): Two selectable circuits to keep highs crisp at any volume.
- Coil Split: Switch humbuckers into single-coil mode for brighter tones.
- Partial Coil Split Select: Enable or disable half-split mode for sparkle with fullness.
- Series/Parallel Switching: Choose fat series tones or clear parallel sounds.
- Jimmy Page Ultimate Wiring: Legendary versatility with coil splits, series/parallel, and phase options.
A premium solderless harness for players who want maximum tone options, reliability, and professional performance.
Calitone Les Paul Solderless Wiring Harness 50/60s
"Great harness! Super easy installation, lots of options with the push/ pull pots! If you're looking to upgrade your factory (or cheap) potentionmeters I highly recommend these Calitone harnesses."
Calitone Strat HSS Solderless Wiring Harness
"Super excited to get this installed in my guitar! Seller is amazing! Got it to me very quickly and it was very well packaged. Just as described. Definitely will buy from them again!"
Calitone Les Paul Jimmy Page Solderless Wiring Harness
"Excellent product offered with great communication and customer service. Love all the tonal options with this harness!"
NEW: Calitone P.A.F. Humbuckers – Vintage Soul.
Hand-wound for players who chase feel, clarity, and touch sensitivity, the Calitone P.A.F. set delivers the warm bloom of late-’50s humbuckers with refined modern balance.
With an Alnico 2 neck (~7.8k DCR) for smooth, open cleans and an Alnico 5 bridge (~8.0k DCR) for punch, detail, and articulation, these pickups give your guitar a timeless voice that responds to every nuance.
Available in 49.2mm, 50mm, and 52mm, with Butyrate bobbins, maple spacers, brass screws, and your choice of vintage 2-conductor or modern 4-conductor wiring.
Classic tone—reborn with Calitone craftsmanship.
Stratocaster Solderless Wiring Harnesses
Transform your Strat with pro-level tone options and effortless installation. Handbuilt with high-quality CTS pots, Switchcraft jack, Orange Drop capacitors, and push-in terminal blocks, this harness is designed for reliability, long life, and clean signal flow — all without soldering.
🔹 Features include:
- Volume Clarity Select (treble bleed): Choose between two treble-bleed circuits to preserve high-end clarity when rolling down the volume.
- Partial Coil Split Select: Enable or disable a half-split mode for bridge or neck humbuckers, blending single-coil brightness with humbucker fullness.
- Tone Control Select: Assign tone knobs to different pickups (e.g., bridge, middle, or neck) for custom shaping.
- Tone Capacitor Select: Switch between capacitor values to fine-tune how your tones roll off — from warm vintage to brighter modern response.
Built with premium, road-tested components for Strat players who demand tonal flexibility, reliability, and pro-level performance.
SG Solderless Wiring Harnesses
Give your SG pro-level tone options and effortless installation — no soldering required. Handbuilt with high-quality CTS pots, Switchcraft switch & jack, Orange Drop capacitors, and push-in terminal blocks, this harness is built for clean signal flow, long-term reliability, and quick pickup swaps.
🔹 Features include:
- Volume Clarity (treble bleed): Each volume pot has a treble-bleed circuit to keep highs crisp and articulate as you roll back the volume.
A premium solderless harness for SG players who want classic tone with modern flexibility in a reliable, easy-to-install package.
Telecaster Solderless Wiring Harnesses
Handbuilt in California with high-quality CTS pots, Switchcraft switch & jack, Low Tolerance capacitors, and push-in terminal blocks for fast, clean installs—no soldering required.
Compatible layouts: HH, HS (Humbucker/Single), SH (Single/Humbucker).
🔹 Features include:
- Volume Clarity (treble bleed): Choose between two treble-bleed voices to keep highs crisp as you roll down the volume—dial in classic or modern taper to taste.
- Balanced Coil Options: Great for HS/SH mixes or split humbuckers. Matches reisitance appropriately for single coils and humbuckers for balanced tone when coil split.
- Solderless, 4-conductor ready: Clearly labeled push-in terminals make pickup swaps and experimentation easy—perfect for players who refine their tone often.
- Tele control feel, pro reliability: Smooth taper, low noise, and road-tested components for consistent performance.
